Maxtor FireWire 800 User's Guide download pdf (Page 53)

Using Your Drive 51

Adding Rubber Feet to Your

Maxtor OneTouch II Drive

If you plan to use your drive on a desk surface, your kit includes

four rubber feet to protect your drive and the surface of your desk.

To apply the feet:

1. Make sure your drive is disconnected properly from your

computer. (“Connecting and Disconnecting the Drive”

on page 27).

2. Make sure your drive is turned off, by turning off the

power switch on the back of the drive.

3. Turn your drive so that the ridges are facing up. This is

the bottom of the drive.

4. Place two rubber feet on each ridge on the bottom of

your drive. One should be placed near the front and the

other toward the back of each ridge.

Figure 15. Adding Rubber Feet to Your Drive

Rubber Feet

Placement

Bottom of Drive

1 2 ... 48 49 50 51 52 53 54 55 56 57

No comments

Maxtor FireWire 800 User's Guide Page 53