Maxtor FireWire 800 User's Guide download pdf (Page 16)

Step 2. Connect the Drive

The Maxtor OneTouch II drive connects to your computer using

either a FireWire or USB interface. Make sure you know which

interface is available on your drive and on your computer.

Please install the software before you connect the drive.

Connecting the Power

1. Plug the round female connector from the power adapter into

the drive’s power connector.

2. Plug the two-pin female connector on the power cord

into the power adapter.

Figure 4. Connecting the Power

3. Plug the standard electrical plug from the power adapter into

your power source.

4. Turn on the Maxtor OneTouch II drive using the power switch

on the back of the drive. The two blue lights on the front of the

drive should illuminate.

5. Determine whether you have USB or FireWire ports available

on your system. If you are connecting your drive with FireWire,

proceed to “Connecting with the FireWire Cable” on page 15.

Connecting with the USB Cable

Do not plug a USB cable into the drive when a FireWire cable

is already connected to the drive. The Maxtor OneTouch II

drive will only operate with one interface at a time.

Before you connect

Disable the File Exchange control panel:

• From the Apple menu, select Control Panels

The Control Panels folder will open.

• Double-click the Extensions Manager icon.

The Extensions Manager panel will open.

• From the list that appears, uncheck the check box next to

the File Exchange control panel by clicking on it.

• Click Restart.

After your Macintosh restarts, proceed to the next step.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 56 57

No comments

Maxtor FireWire 800 User's Guide Page 16