Maxtor 16Channel Stand Alone DVR User Manual download pdf (Page 327)

100

101

315

 Overlay mode: There are two options: preview and encode. Preview means overlay the card

number in the local monitor video. Encode means overlay the card number in the record file.

 Overlay Position: Here you can select the proper overlay position from the dropdown list.

Figure 7-94

7.8.6.1.2 Network Type

The network type interface is shown as below. See Figure 7-95.

Here we take the ATM/POS protocol to continue.

There are two types: with or without the protocol according to client’s requirements.

With the protocol

For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes

you need to input corresponding port number).

Figure 7-95

Without the protocol

For the ATM/POS without the protocol, the interface is shown as in Figure 7-96.

Source IP refers to host IP address that sends out information (usually it is the device host.)

Destination IP refers to other systems that receive information.

Usually you do not need to set source port and target port.

There are total four groups IP. The record channel applies to one group (optional) only.

Six frame ID groups verification can guarantee information validity and legal.

alarm shop

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 357 358

Comments to this Manuals

No comments

Maxtor 16Channel Stand Alone DVR User Manual Page 327

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Maxtor 16Channel Stand Alone DVR