Maxtor 16Channel Stand Alone DVR User Manual download pdf (Page 201)

189

 The video loss has no detection region and sensitivity setup and camera masking has no

detection region setup.

 You can see motion detect icon if current channel has enabled motion detect alarm.

 You can drag you mouse to set motion detect region without Fn button. Please click OK

button to save current region setup. Right click mouse to exit current interface.

4.6.2 Motion Detect

Detection menu is shown as below. See Figure 4-24

 Event type: From the dropdown list you can select motion detection type.

 Channel: Select a channel from the dropdown list to set motion detect function.

 Enable: Check the box here to enable motion detect function.

 Region: Click select button, the interface is shown as in Figure 4-25. Here you can set

motion detection zone. There are 396(PAL)/330(NTSC) small zones. Blue zone is the motion

detection zone. White zone is the disarmed zone. System can only detect motion detect

signal from the arm region. You can click Fn button to switch between the arm mode and

disarm mode. In arm mode, you can click the direction buttons to move the green rectangle

to set the motion detection zone. After you completed the setup, please click ENTER button

to exit current setup. Do remember click save button to save current setup. If you click ESC

button to exit the region setup interface system will not save your zone setup.

 Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.

 Period: Click set button, you can see an interface is shown as in Figure 4-27.Here you can

set motion detect period. System only enables motion detect operation in the specified

periods. It is not for video loss or the camera masking. Please select Sunday to Saturday

from the dropdown list. You can see there are six periods for you to set. Please note you

need to check the box before the period to enable the period setup valid. In Figure 4-27,

select work day or non-work day from the drop down list, and then click the Set button, you

can set your own business day and non-business day setup. See Figure 4-28. You can set

Monday to Friday as the working day and Saturday and Sunday as non-business day. Click

Save button to go back to previous interface.

 Anti-dither: System only memorizes one event during the anti-dither period. The value

ranges from 5s to 600s.

 Alarm output: when an alarm occurs, system enables peripheral alarm devices.

 Latch: when motion detection complete, system auto delays detecting for a specified time.

The value ranges from 1-300(Unit: second)

 Show message: System can pop up a message to alarm you in the local host screen if you

enabled this function.

 Alarm upload: System can upload the alarm signal to the network (including alarm centre)

if you enabled current function.

 Send email: System can send out email to alert you when alarm occurs.

 Record channel: System auto activates motion detection channel(s) to record once an alarm

occurs. Please make sure you have set MD record in Schedule interface(Main Menu-

>Setting->Schedule) and schedule record in manual record interface(Main Menu-

>Advanced->Manual Record)

 PTZ activation: Here you can set PTZ movement when an alarm occurs. Such as go to

preset, tour &pattern when there is an alarm. Click “select” button, you can see an interface

is shown as in X305H305H305HFigure 4-26X.

alarm shop

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 357 358

Comments to this Manuals

No comments

Maxtor 16Channel Stand Alone DVR User Manual Page 201

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Maxtor 16Channel Stand Alone DVR