Maxtor 16Channel Stand Alone DVR User Manual download pdf (Page 196)

184

 Channel: Please select the channel number first. You can select “all” if you want to set for

the whole channels.

 Week day: There are eight options: ranges from Saturday to Sunday and all.

 Pre-record: System can pre-record the video before the event occurs into the file. The value

ranges from 1 to 30 seconds depending on the bit stream.

 Redundancy: System supports redundancy backup function. It allows you backup recorded

file in two disks. You can highlight Redundancy button to activate this function. Please note,

before enable this function, please set at least one HDD as redundant. (Main menu-

>Advanced->HDD Management) Please refer to chapter 4.5.1.2 for detailed information.

Please note this function is null if there is only one HDD. The 4/8-channel HD-SDI

1080P 1.5U series product and the 4/8-channel HD-SDI 2U series product do not

support redundancy function. When the schedule or the manual status is checked on

the record control interface, redundancy HDD only backups record files. It does not

backup picture.

 Snapshot: You can enable this function to snapshoot image when alarm occurs.

 Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm.

 Holiday setting: Click it you can see an interface shown as in Figure 4-18. Here you can set

holiday date. Check the box, it means current channel shall record as your holiday setup.

Please go to the Period interface to set the holiday date record setup. Please note you need

to go to Chapter 5.3.1 to enable Holiday function first.

Please highlight icon to select the corresponding function. After completing all the setups

please click save button, system goes back to the previous menu.

At the bottom of the menu, there are color bars for your reference. Green color stands for

regular recording, yellow color stands for motion detection and red color stands for alarm

recording. The white means the MD and alarm record is valid. Once you have set to record

when the MD and alarm occurs, system will not record neither motion detect occurs nor the

alarm occurs.

Figure 4-17

alarm shop

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 357 358

No comments

Maxtor 16Channel Stand Alone DVR User Manual Page 196