Maxtor Shared Storage Plus+ User's Guide download pdf (Page 10)

Connecting the power

1. Plug the round female connector from the power adapter into

the drive’s power connector.

2. Plug the two-pin female connector on the power cord

into the power adapter.

Figure 4. Connecting the Power

3. Plug the standard electrical plug from the power adapter into

your power source.

Step 2. Power up your drive

Press the button on the front of your drive.

Your drive will now start up. This process requires up to one

minute to complete.

• The button light will turn yellow.

• When the light pulses green, your drive is ready and you can

move on to Step 3.

Your drive will be accessible on your network

approximately 10 seconds after the light turns green.

Power button.

Figure 5. Pressing the Power Button

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Maxtor Shared Storage Plus+ User's Guide Page 10